Printable View
I bought a prebuilt TBI system. I plugged the chip into my autoprom and downloaded it.
After looking at the BIN file I noticed the SA for timing is set at 81*
I've also had problems data logging this computer and getting wacky numbers.
7747 ECM
I've attached the BIN.
Bithoist doesn't recognize it. Says the mask ID is 7D which is a strange one. What number chip? How many pins on the chip?? Maybe a bad read??
Very well could be a bad read or a failed burn to the chip. Using $42 to look at it, the VE table is wacky too. I'd double check all the settings and try to read it again, but it might be just junk.
Had the settings way off.
Should be a readable one attached now
Yep... better.
Here is the results of your BCC/Chip/Bin file!
Processing file gest.bin
File 'gest.bin'
Address: 0xd000,0xdfff
CRC: 0xaf19e52c
Mask ID: 42
ID byte: 0xAA (should be 0x42)
Sum word: 0x8df0 (should be 0x8d88)
Scan ID: 7941
BCC: BDR4376
BCC: ABUL8235
FYI you can check files here:
http://www.gearhead-efi.com/bithoist/query.php
I'm having trouble datalogging. I can get my computer to talk to the car but the #'s I'm getting back are weird. Over 13,ooo% duty cycle on injectors, tach is pegged, other gauges unresponsive.
I'm running the latest version of TunerPro and connecting with the Moates AutoProm.
Using these files
$42-1227747-V5.9.3.xdf
$42-1227747-V5.2.adx
What am I doing wrong?