I like the "Whatever Thread" but how about a weekend report? Kindof the same thing but gives everybody a chance to just say hi, or boring or better yet...
I'll start by unpacking my boxs of shiny bling bling things for inside my motor! :jfj:
Printable View
I like the "Whatever Thread" but how about a weekend report? Kindof the same thing but gives everybody a chance to just say hi, or boring or better yet...
I'll start by unpacking my boxs of shiny bling bling things for inside my motor! :jfj:
So are we supposed to actually mention what we did on the weekend? I'm slowly painting my way around the Stang. And I got an RPM switch wired to my IMRC unit. No more toggle switch :happy:
thanx Six
http://img156.imageshack.us/img156/964/wknd1.jpg
Yup! That's the idea, to show everyone what you did over the weekend.
:confused1:
That is a sweet looking Mustang! :thumbsup:
What's an IMRC?
i really don't remember accomplishing much this weekend... was going to fix the alignment on the wife's GP, but too much rain....
IMRC = Intake Manifold Runner Control - my engine has 16 intake valves but only uses 8 of them at low RPM for more air velocity/swirl/torque - now I have an adjustable circuit that opens the IMRC device and let's me use all 16 intake valves above 3000 RPM
I'll spare you all the excuses I have come up with haha... I'm getting a few runs in the clear coat paint, but some wet sanding and buffing should fix that. I added the stripes :) I think I like them !
The only things I got done this were to get some homework done, and watch some documentaries....
Didn't go anywhere near the car due to the rainy weather. :(
Dude! I think you won a bummer award... :innocent2:Quote:
Originally Posted by Six_Shooter
You did more than that! I saw you are now a moderator at the prestigeous TGO! Congradulations, probably the youngest in history?
I drove my Scout in 78 degree sunshine!
[attachment=0:28mim40b]73-scout.jpg[/attachment:28mim40b]
I highly doubt I'm the youngest, being in my 30's and all. lol
Oh, I got a hair cut too.
VVVVVVVVVVVVVVVVVVVVTAK!Quote:
Originally Posted by Lucky
Nice Scout ! I admire any vehicle that makes my Rover look good. Well better anyway ... :laugh:
@Six - haircut, diploma, TGO - you're on fire! next you'll be running for Mayor :rockon:
LOL, nope, I can't lie through my teeth like that. :D
30's ey! For some reason I thought you were always talking high school work... thought you knew to much to be a kid!Quote:
Originally Posted by Six_Shooter
Thanks! It only has 66K on it! I have had it for a year or so and it has caused me turmoil. I have never, never, ever, really never left a vehicle stock. So for a year or so it has been haunting me. I want to leave it bone stock because it is bone stock totally unmolested.Quote:
Originally Posted by Lucky
Then on the other hand it has a 258 Six Cylinder that came in Jeeps. IH used them for an economy model. This one also has a three speed and one speed transfer case. Cheap model!
BUT I have a 4.0L HO head, then found a 2005 Tuned Port factory intake. Man it is killing me to leave it stock!
With the 258 Six banger I could also bolt in a 5 or 6 speed from factory Jeeps.
So you see my dilema??? It's a horrible situation! But I think this weekend I decided to do it... I can't sell it as it was a gift from a freind believe it or not... So I think it's getting hot rodded. I may even take out the 4x4 and make it 2WD with a little lowering, skinny tires up front and big fat whatever will fill the wheel well without rubbing or cutting. I don't know? But it's going to get the engine hot rodded and the 5 or 6 speed. Probably 5 speed as the six speed only bolted to the motor in 2006. That was the last year of the Jeep six cylinder and the last vehicle to leave detroit with a flat tappet cam.
I am talking about high school work. I am finishing my high schooling to get my diploma. :)
Well now I know why I got that impression! Good for you! Lots of people just won't go back and finish but I admire your fortitude!Quote:
Originally Posted by Six_Shooter