Printable View
How can I run a 2 or 3 bar map using TunerPro for tuning. It seems unless I get HPtuners, I am stuck staying at the 5-6 psi boost level with the 1bar map. Looking to run a 4.8 4L80 on a 1mb pcm.Just wondering what my options would be.
Also, if I would get HPtuners and run a 3 bar map and read the tuned PCM with PCM Hammer, would it read back a 3bar map, lol. Trying to figure my cheapest option here... How many HP Tuner credits would it take? Thanks, totally new at this...
PCM Hammer would read back precisely what was on your HP Tuners-created operating system. If it was 3 bar before reading it, it will still be a 3 bar afterwards though it will not be in the same *.hpt format. It will be in a *.bin format.
I'm not a hundred percent certain but I think you would be looking at two HP Tuners credits.
Rick
I'm in the process of coming out with a 3 Bar OS that is currently in testing. It will be free and in my opinion is better than HPTuners and EFI Live custom OS's.
Check it out:
https://pcmhacking.net/forums/viewtopic.php?f=27&t=7195