Donor ECM

So I broke down and bought a donor ECM to play with. I bought an ECM, the blue connector, and an ODBII port from the salvage yard. On the blue connector I removed all the wires except for pins 1, 19,20, and 58. I have connected the blue connector to the ECM, wired the ODBII port to the ECM. I using an ODBLink MX+ Bluetooth adapter with PCM hammer for reading the ECM. It is connecting and starting to read but errors out a 3%. I have attached the user log. Any assistance would be deeply appreciated.

Attachment 18244


[05:20:15:757] PCM Hammer 021
[05:20:15:758] Monday, September 05 2022 @05:20:15:75
[05:20:17:874] Voltage: 12.4V
[05:20:17:882] Elm ID: ELM327 v1.4b
[05:20:17:906] ScanTool device ID: STN2255 v5.6.19
[05:20:29:349] Will save to C:\Users\Administrator\Downloads\PcmHammer021\PcmH ammer021\Donor.bin
[05:20:34:123] Querying operating system of current PCM.
[05:20:34:395] OSID: 12208322
[05:20:34:580] Unlock succeeded.
[05:20:34:625] This interface does not support VPW 4x
[05:20:35:656] Kernel upload 9% complete.
[05:20:36:664] Kernel upload 22% complete.
[05:20:37:702] Kernel upload 35% complete.
[05:20:38:760] Kernel upload 48% complete.
[05:20:39:814] Kernel upload 61% complete.
[05:20:40:892] Kernel upload 74% complete.
[05:20:41:960] Kernel upload 87% complete.
[05:20:43:028] Kernel upload 100% complete.
[05:20:44:513] Kernel Version: 01030501
[05:20:44:521] kernel uploaded to PCM succesfully. Requesting data...
[05:20:44:610] Flash chip: Intel 28F400B, 512kb
[05:22:08:862] Unable to read block from 18432 to 19455
[05:22:09:241] Clearing trouble codes.
[05:22:11:531] Elapsed time 00:01:36.9478430
[05:22:11:545] Read failed, Error