Originally Posted by
conwaymuddy
Try this again after the site logged me off and this disappeared.
I think these should be all the wires/ pins i need to run the engine
A5,a4,f11,b2 - distributor
E15,a16,a9 - injectors
A10, f15 - O2 sensor
F6,b12, e16 - fuel pump relay
E6 - check engine light
F9,a14 - data link
B4,b13,e14 - map sensor
F14, a15, b3 - throttle position sensor
B8 - engine coolant temp sensor
A1,a2,a12, - ground
A7,a8,a3,a6 - IAC
Wires/ pins im unsure of
B15 - knock sensor, dont have but could always add later
E13 - brake switch, serve any purpose?
F12,f13 - V.S.S. buffer, do i need this if i run a V.S.S
F2, f3 - V.S.S, any harm in leaving these in unconnected at the sensor end until i decide on running V.S.S or not?
I think that should get the engine running minuse the smog garbage and e-trans control. Let me know if im missing anything or what else can be removed.
Thank you