Small Datalog run TunerPro RT

Hi was up you guys did a small datalog run using tuner pro rt. First time using the program, think I got it down now. Just received the Burner 2 and supporting chips and zif socket. Finished modify a 7747 ecm to accept the 28 pin chips. I have attached a very small datalog run using a home-made aldl cable.

Specs: 1991 Chevy 1500
Stock 350 tbi Vin K
Top end refresh
Timing 4* Advance
700r4
Vette Servo

The datalog is still using the stock ecm that the vehicle came from factory. If someone could please take a look and let me know their opinon.

Here is the most recent log I did. THis is with my first chip burn using the asdu auto 5.7 bin and with egr patch, bpw and spark advance hack patch. also did Air,PE,DFCO by turning em off.