JET DST question .cal files

I have JETs DST and I know just enough to be dangerous. I discovered a .cal tunercat file in the stickys with an interesting looking tune. Can I just load the .cal I found onto the car to try it? Is there anything I need to worry about? OS version of PCM? VIN number? etc? What should I look for?? So I dont screw something up? I guess the question is... How do I know if the tune I found in the stickys is even compatible with my PCM?

Thanks for the help!!

This is all for a 97 Trans Am LT1 M6 WS6.

All 97 Camaro/Transam files are the same, you can flash it to your car without issue, I have done it several times.
However, I advise not to flash an unknown file to your PCM. Instead, check the tables and parameters to see what is good for you and what isn't

Quote:

---

Originally Posted by Montecarlodrag

All 97 Camaro/Transam files are the same, you can flash it to your car without issue, I have done it several times.
However, I advise not to flash an unknown file to your PCM. Instead, check the tables and parameters to see what is good for you and what isn't

---

Thanks! That answered that question. I'll just compare the two and mod the file from my car.

Quote:

---

Originally Posted by freshcutmullet

Thanks! That answered that question. I'll just compare the two and mod the file from my car.

---

Good choice, that is the proper way to modify the tune of your vehicle.
While you're at it, change 1 thing at a time and test. You will find what that table does and learn a lot from it