Printable View
Hey Guys,
Can somebody tell me how I can view tables from different bin's side by side so I can see the difference in the tables? I've been trying to do it by loading the different bins with "compare bins". I can switch from 1>2 with the "ctrl1" etc. But I want to look at the respective tables side by side.
if you load the bin as a 'compare bin' then there are two buttons in the toolbar when viewing the table data that help.
if you hover the mouse over them, you'll see one called 'show comapre bin data'. pressing that button shows the data from the other table (replacing the data from your table)
leave that button clicked, and also click the next one called 'compare difference'. this will show the difference between your table and the other table (if it shows -2, that means your value is 2 lower than the table you're comparing with. if it shows 12, your table is 12 higher.)
i've attached a picture so you see what i mean.
another way is to view the tables overlayed as a graph. click wireframe view and show compare graphs in the toolbar like pictured.
don't leave the 'compare' stuff on the table itself set (like in previous post) when you do this, or things will get messed up.
the last way is with tools, custom tools, new tunerpro instance. that opens a whole other tunerpro, which you can display another bin side by side. this should be unnecessary when using the compare feature properly except when moving tables from a different mask or something.
Thanks Steve, I was able to do the first and last example. So, if the compare table comes up with all zero's then there is no difference in the 2 tables, right?
.
yup. and if you turn off the difference button you can flip back and forth to make sure.
Awesome, did not know about that feature. Had been wanting to do something like that.Quote:
Originally Posted by steveo
another way to do that too, just alter your tunerpro shortcut..
Same here! This works awesome!Quote:
Originally Posted by Woods
BLG