simultaneous emulating and datalogging with APU1 and tuner pro

I standalone datalog without problems with the outboard switch in the passthrough mode and the dash comes up when I go to "acquisition" then to "start/stop data scan" and I can watch the dash respond with no problems.

I have just tried to emulate and I have gotten to the point where I think I am emulating with the bin loaded, verified and the emulation indicators says I am emulating

Now I wish to see the realtime datscan while in the emulation mode to verify closed loop operation and observe realtime changes. I keep the outboard switch in the "inboard" towards the USB port position

I cannot get the dash to function while emulating and am nervous to make changes without realtime dash feedback to observe. In particular I wish to change timing while observing KPA

How do I data log and emulate simultaneously???

7427 computer, 1995 GMC, moates APU1, tunerpro RT software

john

I figured it out....

go to "tool"... click on "preferences"... click on "data acq./emulation" tab... select "interface type" button.... select autoprom/MAFTPro. Reboot and it now works

Its a good thing this autoprom costs big bucks or I would have smashed it to pieces three or four times already!!! nice tool, lousy instructions...

hope this helps somebody else

john

It helped me. Thx

There's no need to reboot when you switch between acquisition plug in or the APU1/MAFTPro selections.