-
To be honest that’s part of it haha just want to get this long overdue project on the road I had the tune done a few years ago and barely got the car going the 4l60e wasn’t going into 3rd or 4th sometimes it would if I jumped on it tcc would never lock up I couldn’t figure it out and the place that did the tune is no longer around not sure if the problem comes from the gear ratio and wheel size being different than what the tube was for
-
I might have missed it, but did not see where you posted your bin file
-
ill post it right now give me a second
-
1 Attachment(s)
-
I’m eventually going to go back to the 4l60e I’m going to rebuild it soon as soon as I’m done with another project so for the time being wanted to throw in one of these other transmissions in I can’t seem to find the enable transmission feature on tuner pro
-
1 Attachment(s)
Are you using Parameter Category view?
Attachment 19152
-
Thank you sir ! Figured it out using the EEXTRA xdf
-
Ok so got the trans in disabled the Automatic transmission controls now to find a mechanical to electric speedo conversion that puts out the 40 ppm the ecm needs for the vss everything I find is 8k ppm I read some say I can use a vss from a 1990 pick up but not sure how that works