Wonder if that is going to be an issue with my A8 and a DIS/ICM change?
Printable View
Wonder if that is going to be an issue with my A8 and a DIS/ICM change?
as of this moment, i'm not certain. it is likely possible to remove the necessity of the 1X signal from the code and have it act normally otherwise, but i can't say for certain yet.
8009, bit 5 is definitely 1X signal related.... when the flag is not set, a bunch of 1X related stuff is bypassed entirely.
that may be the easiest answer.
mode 4 is handy on 4l60e cars and 4l80e so you can command 3rd gear hold on the dyno so you dont downshift at full throttle