-
so getting back at this, trying to get everything bench built whiule the truck is still in the body shop.
did get a 94 ECM and knock sensor, but can not find an ESC module to go with it. is there one on a 94?
also, will I need to do prom editing for the TCC to be controlled by the ECM?
what should my wiring be for TCC to the 94 harness? im using a mid 80's 700r4
I also picked up the cruise control for the 94 chevy truck to add in. anything special I need to kow to make it work? will any other switch work it, or just the 94 wiper/cruise/dimmer combo switch?
lastly, at the moment, factory wiring schematocs call for a VSS buffer. will I need one, or is that just for the speedometer?
-
The ESC is built into the MEMCAL on the '94 TBI PCM.
Buffer, or DRAC is for both speedo and PCM.
-
so I guess the question is, will I need a buffer for proper system function? if so, where is it located in the donor truck?
thanks for letting me know about the esc being in the memcal. I thought I was gonna go nuts trying to find one.
also, the diagrams show a heating circuit for the 02 sensor, but all the parts houses show a single wire sensor. so whats the deal?
also, any feedback on the TCC wiring/prom tweaks for the 700r4?
-
DRAC or VSSB should be behind the glove box nearer the center of the truck. Not far from the PCM.
-
back at this again. finally. wow, ive drug this out. but then again, truck was in the body shop for a year....
modifying the harness, stripping out all the emissions stuff, etc. making it as minimal as possible.
what wiring changes do I need to do to only control the lockup converter on the 700r4? I do not have, nor am I planning to swap to, an electronic transmission. if I dom I guess ill be building another harness or reinstalling that stuff in this one.
any emissions stuff need to stay for proper system operation? I cant think of any, as I have no provisions for EGR, etc. the rest is completely unnecessary as I have no emissions inspections on a 64 in NC other than a PCV valve.
thanks guys.
Michael