Quote:
I've got a long road trip ahead, so I'll be spending some time reading through how to build a spark table. That was part of what brought me to this to start with was the feeling that the ignition system wasn't doing what it should. at certain temps, certain pressures, etc it acts like it's got a worn distributor cap, or frayed plug wires. it's nearly impossible to reproduce on command, but the way it acts when it does it is too consistent to be a fueling issue (I thought). THat's what had me chasing knock sensor issues.
Make the above changes before rebuilding the spark table so we have a base-line.
Quote:
Also: The bottom of Page 26 in the readme file for S_AUJP is the instructions on transferring calibration. Do I have the wrong readme? We've already done that, that's why we're fighting with bizarre changes that should never have been made in the BIN...
Don't understand "wrong readme". I think what you're referring to are the ALDL reporting scalars. If I recall, none of those changes were made in your BIN. Just verify that the values shown are in your BIN. If not, then change them. They do not affect anything other than to ensure those items are reported in a log.