EGR delete (disable) question

Burning a chip for an 88 TPI MAF engine with EGR delete plate. After selecting EGR Disable ..would it be advisable to also set the EGR On at 100% TPS position and EGR Off at 0% TPS position (or leave it alone)?

i believe in the past i just cranked the minimum enable temp to as high as it goes

You may have to disable the MALF code in "Flags"

Quote:

---

Originally Posted by tayto

i believe in the past i just cranked the minimum enable temp to as high as it goes

---

This.

No EGR FLAG listed....

In the parameter list the enable EGR feature is not labeled as "enable temp" but does have "enable EGR if % of TPS is met"...going to just change it to max TPS position.

Thanks!