I've had 100% Success / ZERO% Failures with the re-ground camshafts I've purchased from Oregon Camshaft: http://www.oregoncamshaft.com/
dave w
I've had 100% Success / ZERO% Failures with the re-ground camshafts I've purchased from Oregon Camshaft: http://www.oregoncamshaft.com/
dave w
Thanks after a talk with a person named Ken at Oregoncamshaft, I mailed my old cam for a stronger cam regrind.
The cam I am getting is their strongest towing cam, with the following specs: 203 208 410 425 and 114 lobe, was told power range was 1000 to 4500RPMs.
I hope there is a program to show how an engine will run on the cam specs entered; all I have found is one that shows the cams specs like the photo:
I think I saw one that you inter all your engine specs and it would project how the engine would perform.
I am looking for one that will calculate the power curves, showing the torque curve and horse power curve at projected RPM.
Thanks.
Rich
Attachment 15365