Anyone have a start up file for a 2003 lm7 stage 2 cam swap for that OS?
considering doing that cam( e1840p)but need a starting file to run before tuning.any help greatly appreciated
Printable View
Anyone have a start up file for a 2003 lm7 stage 2 cam swap for that OS?
considering doing that cam( e1840p)but need a starting file to run before tuning.any help greatly appreciated
Hello,
Need to know what injectors, intake, TB, is engine stock besides valvetrain, which MAF, automatic or manual, cats, exhaust setup?
Stock engine stock injectors ls1 intake factory maf sensor no cats dual exhaust 4l60e.going into a 68 firebird.not a racer just looking for a bit of rumble.not max power
Hello,
Drive by wire or cable, rear end ratio and tire size(ie 275/45/17 or whatever)? See if you can see the injector part number too. Is the computer from your exact combo? Meaning, did you buy an engine/trans/harness/pcm combo? If so, please post a bin file and I'll make you a starting file.
Yepper, thanks. I'll be posting the bin file here for others to start with since a starting file will help. Tuning "in person" is always better than the next guys "guestimate" lol. My guestimates from doing efi for over 30 years are pretty good, but still nothing like hands on to verify and make fine tune changes. :)
Hiya,
Not yet, I'm buried busy but will try to post this weekend :)
Have you had any time yet to assist me?if so let me know what you want for the file.i one's you my email address.ty
Here ya go, modded starting file. Lotsa changes :)
Injectors 12594512
Cam change
Tire size 245/50/16
Gearing is 3:73
Thank you so much!! You can man.kudos for your assistance
Oh, also the fuel injector table is setup for a non vacuum fuel regulator.
Great.I have a corvette returnless setup