help me obd 1 your my only hope

hi so ive got the pcm#16188051 but were would the bin# be ..94 roadmaster also on the pcm there was blpp also *86BLPPK1408766AG* and 16207211 thanks also how do I know wich $ee or $eeb to use

look here for some good info. http://www.gearhead-efi.com/Fuel-Inj...rmation-EE-EEB

you should have a 4 digit BCC code not a bin number per se. when you find it you can look it up on the site below

http://www.gearhead-efi.com/BCCFind/

/BLPP/ ***Unable to locate bcc***

BLPP sounds like the BCC from your information. We don't seem to have a copy of that bin for me to check for you...

The LT1 PCM does not have a removable chip like other ECM/PCM. It is a flash prom through ALDL port. You will need a cable to connect to car and laptop and software program called WinFlash from TunerCat. Once you get the bin downloaded with Winflash you can look at injector flow or cylinder volume in TunerPro with $EE and if numbers are strange it is an early model $EEB.

Then you can use TunerPro to adjust the bin and record data.

As a side note if it is an early $EEB you can use an $EE bin file to reflash your PCM.

but how do i find it ???i see the pcm# on this site but what about the bcc#

Quote:

---

Originally Posted by swat455

but how do i find it ???i see the pcm# on this site but what about the bcc#

---

You found it on your PCM already. We just don't have a copy of that bin file, so when your read it donate a copy for our files.

Quote:

---

also on the pcm there was blpp also *86BLPPK1408766AG*

---

BLPP is your bin/BCC/chip

thanks I put that reply on before you put yours on so thats what ill do thank you

so i got the 30 day trial cats winflash read my pcm.. but i cant get it to transfer over to tunerpro to run it what am i doing wrong and also to put it on here

Well if you used Winflash to read the PCM and saved the file, then you need the $EE XDF in TunerPro to read the file. Read the tutorial for TunerPro, first thread here:
http://www.gearhead-efi.com/Fuel-Inj...ro-Tuning-Talk