Datalogging in TunerPro

Hi,
I'm really new to this forum, and also new to Datalogging and TunerPro
So a little help would be very much appreciated :)

I've got the 16144288 ECU in my -92 Gmt400. What I want to do now is just datalog, access the sensor voltages and data for trouble shooting. It's running very rich..

Working offshore so I'm trying to gain as much information as I can before I get home to the truck :)

From the link : http://www.gearhead-efi.com/Fuel-Inj...Information-AO
All the necessary files were found, but I need some help figuring out what to do with them.

Should I just download the first file $A0.xdf, and select it in TunerPro RT. Plug in the ALDL cable with drivers installed, choose right COM port, press the "double arrows" and voila, the data from all sensors will appear?

Seems a bit simple..

Thank you !

//Otto

First of all welcome to the forum!!! Xdf is the definition file for parameters on the bin. All I see available on the link^^^is a ads which is used for data logging w tunerpro rt v4 however it can be converted into adx with tunerpro rt v5 which is required if using v5.

thanks for the answer :)
OK, I'll go with the V4 then.
Will try when I get home!

Sorry to piggyback on this thread but I have also all the correct files but was using aldldroid with my tablet, I have gathered data but don’t really know what to look for, just want to gather data on an issue my 1990 tbi is having, is there like something that shows which sensors should be at which numbers?