Hey Doc, I used the ATPZ, basically the same as far as I could see as the AKUP except it goes into CL
Ian
Type: Posts; User: 04hdstd
Hey Doc, I used the ATPZ, basically the same as far as I could see as the AKUP except it goes into CL
Ian
Thank you, I just figured it out I was using that guide but was using the the HEX from the 16K thinking it was for the 4K, basically reading the wrong line
Hi all, I read my stock 2732a just fine, but when i try to read the 27fs512 that i have a custom burn on and look at the parameters in tuner pro all the maps read 0. I have most of my bins backed up...
did you happen to find anything out? I am in need of the same info
Thank You everyone,
As of today I been running with DFCO, PE, and the Air Diverter Enabled. Hiway Lean and EGR are Disabled. The truck is running really good. AFR's are rock solid. I did add some AE...
I ran with just the EGR enabled today and it ran ok, the AFR would get funky when I get back on the throttle it would go down to about 16.5 and then starts running normal. I think i am going to...
Hello
A little run down of what i have done. First off i got this truck a few months ago and have done some work to it. It had a 7.4L swapped into it. The truck originally had a 5.7L in it and as...
Thank you Eagle!! Makes much more sense now... And I did read that Link before Brian and yes I had to reread it a few times... LOL. My WB is programmable, and I can switch it to show lambda, I may...
I have a few questions on Tuner Pro and stoich and AFR. I am running a 7.4L, ECM 7747 and Bin ATPY.
Ok I appologize if this is confusing. I am trying to get a better understanding of how this...
Hi Eagle,
Can I ask a few questions???
I know BLM and INT are some what related, but im not quite understanding it. Correct me if im wrong but I understand BLM to be a measure of how lean or rich...
thanks... i will take a look into it... I seen a thread where you and a few others were talking about it and the only real idea was using a voltage divider on factory NB input
Hi Eagle, with the 7747 ecm, is there a way to datalog a wideband as the 7730?
Thank You Eagle!
Hello...
Let me introduce myself... My name is Ian
I am new to this forum and I have been reading alot of posts and learning alot. I am new to tuning GM's. I have used such standalone systems...