Yes, it's easy to get super cranky when you don't have anyone else to bounce Ideas off. Glad you got it sorted.
I'd still like to read that stock AWUM to have for my archives. If someone else has...

Hiya,
Well shoot, I know I had some LT5 disassemblies but must have been lost is some laptop crashes from years ago :(

This might help others looking for broadcast code info on these.

The chips run on magic smoke, if you let the smoke out, no more worky :mad1:
Yepper, plenty of times I will just swap a chip with the key off. The emulation stuff can get a bit weird at times...

Noid light kits,
https://www.rockauto.com/en/moreinfo.php?pk=8785800&cc=0&pt=1001027&jsn=328
https://www.rockauto.com/en/moreinfo.php?pk=8785804&cc=0&pt=1001027&jsn=330

I am 99% sure pulling the...

Good job. :rockon::rockon::rockon: :thumbsup:

Hiya,
Post bin file.

Hiya Bob,
Did you make it home ok?

Hiya's,
I am probably going to get one of these for my 2013 https://zzperformance.com/collections/sonic-cruze-turbo-parts-kits/products/zzp-big-wheel-turbo

Doesn't he need 10 posts or something to allow attachments?

The '7165 ecm uses a 16k memcal eprom, the '7730 uses a 32k memcal eprom. Completely different instruction set.

I'm pretty sure that won't work.

You might try Dave @ Powertrain Electronics. He might still have his test bench set up. Eight 0 Five 466-5252

Hiya's,
I'll throw this out there...I had a set of EngineTech head gaskets leak water as I was filling the radiator, I was hoping a couple heat cycles would do something, nope. The fire ring...

Hiya's Folks,
Wowsie, over 34,000 views... and others pitching in with current codes. It appears to be helpful :happy:

Hiya,
Shoot, it looks like all I have is a H2 file. You can purchase the stock .cal files from John @ TunerCat on the cheap.

Hiya boba,
The next thing I would do is a replacement internal harness for the 4L80E(another notorious fail). You're going to want one for the rebuild anyway(as well as all solenoids during...

Hiya,
I'm not sure if you have internet on your vacation. How's everything going?

I'd love to help but I still haven't found or been able to buy a 94-95 pcm at a reasonable price :(

First thing is get rid of that adapter and just try the memcal alone, Those are a HUGE failure point regardless of brand. Report back ;)

Hiya's
Have you tried the BAMM memcal? It's 3.73 vs your 4.10 rear end and probably a few other things. Once you lose scanner data stream, it means the eprom is no longer communicating. Those...

Hiya,
Is this a 454/4L80E TBI? '7060 PCM?

Prog ID BCC Size Year Release Date Eprom ECM Prom ID Scan ID Platform Engine Disp. Trans Trans Type Gear Ratio


BBMD 1993 33702 16179257 16168625 9258 9291 C1 L05 5.7 M30 AUTO GT4

Thanks Tom,
I mentioned PM in case you didn't want if public. Man, shit ton of equates in there :happy: I'll have a gander tomorrow :)

Hiya Tom, I will have to dig to find this older stuff. I'm surprised you are using MotS, Intel hex has always seemed good but I have never worked with your box. If you would like, PM me the code to...

Very common smog problem with ANTY.

Double check chip orientation. Dimple in chip needs to match dimple in holder.