Like already mentioned, if you have a laptop have a look for the hantek1008 or the picoscop 2204 A .The hantek is a 8 channel one while the picoscope has only two channels. Both are about 150 bucks...
Type: Posts; User: mecanicus
Like already mentioned, if you have a laptop have a look for the hantek1008 or the picoscop 2204 A .The hantek is a 8 channel one while the picoscope has only two channels. Both are about 150 bucks...
Search for somebody with an oscilloscop or have one for yourself. There are cheap ones on te market used or brand new like hantek.With an oscilloscop you may find where the irritation in the current...
Hi Dave,off course you are right, BLM near idle is always under 128. So wouldn`t it be better to change the VE Table?
Hello,
i guess your idle-gas is too lean so the IAC has to compensate this, that engine will not stall.Try attached xdl and adx files!
according to the second post of this...
Thats what i have found on the internet!
:thumbsup::thumbsup::thumbsup:
You can even close the left side bar in "PlayingWithTBI"s picture.
Isn`t that enough full screen?
"Remember,I'm computer illiterate!!!"
So you should first learn how to work with your computer respective with windows.!!!
If you drive with the mouse pointer over a corner of the tunerpro...
Hi, you could try those attached xdf files.
@tayto, in general you are right but I couldn`t find the ADTD nor the AMUS!
Hi Mwtvvo, could you please publish your bins here.I have the amc304 engine in my car and would like to test these bins on it.
Search for BCClookup.xls and filter your needs.Or have a look to what I have found.
"BTW, I do have an oversized Novak Jeep radiator which keeps it running cool if that may be a problem of the engine never getting warm enough... just a thought...??... "
Check your thermostat, it...
netbooks like the samsung n 140 work on windows and have an usb connector!
Congratulation - best DIY solution.
Like six_shooter said ,it is very easy.You need for example the Delock 83786 usb ttl konverter ( must be a 5V one) normally amazon has it. Then you need an obd plug. (Oposite of your cars socket)...
No, but i am too stupid to alter the spark advance tables fitting to my V8! :-)
Hello,
yes, it is possible.Read this:http://www.gearhead-efi.com/Fuel-Injection/showthread.php?21-Building-a-GM-EFI-Small-Cap-Distributor-for-TBI-Conversions!
On the AMC distributer you only need...
connect pin 28 and 29 additionally to ground!
Thank you for your advice but the mentioned xdf is too poor.
mecanicus
Hello,
does anybody have adx and xdf files for AZFP or APZW bin? Both are from 1.6 liter opel(GM) cars.
mecanicus
@ rang-a-stang
hi, could you publish your new SA table?
mecanicus
Hello,
could you succeed with your SA table.
My Cj7 with 401 and the 16196395 is running but it could do better in the range of 1000 to 2000rpm.
mecanicus
like the moat-HDR1