When I installed the 5.7l Hemi in my 2007 4 door wrangler I had a lot of cooling issues. Not cooling the engine but heat build up under the hood.
The Hemi fills the complete engine compartment up....
Type: Posts; User: Thorwon
When I installed the 5.7l Hemi in my 2007 4 door wrangler I had a lot of cooling issues. Not cooling the engine but heat build up under the hood.
The Hemi fills the complete engine compartment up....
Those tables are NOT the same. They aren't set-up the same, so the values probably aren't interchangeable.
Hopefully somebody will chime in and give you advice on how to fix it. That's a little over...
That's what I'm trying to duplicate.
I have the CMP covered. It's the CPS (crank position sensor) that I want to make sure I have the correct one for this trigger.
I know the factory Vortec 24x...
I've found a place that'll laser cut parts. So I sent them this drawing (the PDF) to see how good they do. I ordered 4 of them and it was under $100. That included zinc plating.
I'm pleased to...
I'm just learning so I'm no expert. Use the search bar and read everything related to whatever you're trying to do. sometimes I just scroll through the pages of threads to see if anything catches my...
He's referring to the throttle stop screw. It's on the linkage side of the throttle body.
I don't want to hijack the thread, but what's the difference?
I'll look into that IAC.
My dad rebuilt it completely about 8 years ago. My son got it from him and drove it while he was in high school.
I'd bet it doesn't have 20K on it since it was rebuilt.
Very nice.
Were you running it on a 0411 or is it a Delco?
Here's a short video of it running.
https://www.youtube.com/shorts/kIXigekwo-A
That would be great info to have. So yep if you can find it I'd love to have that part number.
If ya got a pic of the way you mounted it, I'd like to see that too.
I given up on using the Jeep throttle body. I just can't get the IAC to work with the GM computer.
The lowest I can get it to idle is @1100 and it's always changing 100 -200 RPM.
I made an adaptor...
Once I get things straight on this thing I plan to play with it.
I'm looking at it like this.
I have a 2.5L engine, I'm running it on a PCM that thinks it's running a 5.3L engine.
The 2.5L is...
Dave can you tell me if the fan control wire is positive or ground? I can't remember.
I fired it up today. It sounds really good. It started pretty easy once I got every thing hooked up.
It's idling at about 1100 RPM but I expected it to be a little off from all the different sensors...
Here's a link to that thread.
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?10225-Inline-6-on-a-0411-pcm&highlight=Jeep+engine
I'm going to be using the cam sensor from a 2004 4.0L engine. It's a drop in part and gives a 1x signal.
17843
I'm currently running a 4.0L in a 1988 Comanche on a P59.
I pulled it from a 2004...
I had the opportunity The last couple of days to make a little progress. I got the crank reluctor mounted and I think I've got the "0" position figured out.
Here's some pics of the reluctor and...
Sounds interesting. So this would only need 1 O2 sensor?
I have HPtuners. I've just had bad experiences with them and don't want to give them anymore of my money.
My YJ is a 1987, nothing on it, as far as wiring, is much good.
I have looked at GM Delco 4 cyl PCMs and the support just isn't there. I'm sure some of the guys over on the Delco board could do it, but I'm not that guy.
I've read a lot about the 0411 and think I...
That's a good video and it lead to about 2 hours watching videos on 4x and 24x reluctors. LOL
Ok so 24x it is. Now I've got to find or build a reluctor. I think I want to build it. I've got to...
I have a few questions for ya'll.
As you know from the title of the thread I'm going to run my 2.5L jeep on a 0411.
I have been setting it up to run on low res 4x crank trigger. But I have a 24x...
https://pcmhacking.net/forums/download/file.php?id=28096&t=1
This is a 1987 Jeep YJ with a 2.5L 4 cylinder engine. The first pic is where I was mocking up the late model port injection manifold in...
PCM Hammer is your ticket to read/write to the P59. Build a bench harness and you're ready to go.
https://pcmhacking.net/forums/viewtopic.php?f=42&t=7579