I hear you- this is one of the last non stock projects I'll undertake and the second mistake is that although the ecu is a decent unit- it is unheard of in north america so support is an issue if...
Type: Posts; User: dfarr67
I hear you- this is one of the last non stock projects I'll undertake and the second mistake is that although the ecu is a decent unit- it is unheard of in north america so support is an issue if...
A fellow wired it, another guy tuned it- so it does run but hasn't been put into service. I'm finding wiring issues I need to address, fuel pressure sensor is not working, engine light not working,...
Just started digging into the harness- have a couple other issues before looking back at the TPS. IAC- turns out the switched 12V+ and the ecu (-) control were wired backwards (my reading shows pos...
Sorry for the late reply- got into the interior/carpet/sound system- about to dive back into the ecu wiring.
Another question- this has the 90's Ford pwm iac- is the airflow directional?
What's the experience out there?
Toyota 22RET with aftermarket ecu.
- warmed engine running at idle NO throttle action.
- TPS voltage is observed to drift up out of idle window and engine...
Was recording bits of knock (false or not), changed out the Evans for regular antifreeze- and that alone cut it by 50%. Need to get it retuned with 'knock ears' I think it may be just a noisey engine.
I have a GMT400- I don't work it like you do. There was a 454cid in the mix as an option in those years and that's the alum radiator I run with vette fans. No issues.
Bosch LSU 4.9 lambda sensor
This is a genuine Bosch LSU 4.9 lambda sensor with 1 metre long cable and small D shaped connector. Part number 0 258 017 025
Just looking for an application so I...
I have adjusted the stoich to 14.5 then I have a open loop AFR table I adjusted accross the board- currently learning in VE.
Unless this is a collectors deal- and with you screwing with it - I doubt it, convert to a single TBI and EBL or TPI, should be dirt cheap units out there and a ton of info on Thirdgen.org. Lots of...
Sourced one thanks.
Roughly- its been a long time.
- Firebird 90 deg TB boot.
- GMT400 diesel air filter housing, made tube between to fit between.
- 385cid, AFR vortec, FIRST TPI- w oem TB, injector rails.
- batch...
16185
You are right about the EBL- I have a 700R right now and will be moving to the last gen one piece case 4x4 4L60E next year with the 0411 ecu.
- I've got something similar only older:
-- rebuild your trans with needed upgrades- these aren't a 'robust' transmission, so 94/95 issue problem solved.
-- center head bolts not really an issue...
There is a supplied spreadsheet that generates the BPC supplied by DynamicEFI.
EBL- port version. 385cid with 36pph injectors and 43.5psi fuel.
N/A application, if you didn't want to touch the BPC value, how would you compensate for areas of a VE table that want to go higher than 100% ? BPC should be 127 and are currently set to 135 to...
So I went back to the BLH ESC module (1985ish Corvette app) and installed the new matching knock sensor (both applications OBD1). Still showing knock but I'm comfortable with working with this. To...
I think the trick is to prevent rather than recover. I did order the sensor, I just found it odd that the same style and engine displacement demanded a different part number.
1608816089
This is an EBL setup, and the ping has been an issue for some time. I dabble in tuning so don't really know it well. I was thinking last night that the learns is doing its thing, I've cut PE/SA to 0,...
There are absolutely other ways of doing it. It's ultimately only if you want to use factory hardware that you end up in the situation where you would need to create your own custom knock module.
...
I bought a stand alone system out of Iceland for the Toyota- which at the time didn't offer knock, for an extra $200 now you purchase an option which includes WB and knock- have to force knock on a...
I have 3 or 4 EC modules I can try and log, easy swap.
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1458-Knock-Sensor-Knock-Filter-ESC-and-swaps!...
I know it's up to me to see whats best for my system but I wanted to know what experience is out there with false knock or overly sensitive system. 383 TPI (EBL) in 89 K1500. Was using BLH ESC module...