has anyone used these replacement injectors? looks like a good idea.
14136
Type: Posts; User: Loyd
has anyone used these replacement injectors? looks like a good idea.
14136
Hey whatif3387. how did you solve the return line problem , a retrun on the tbi and on the VRFPR. this may help solve my problem of not enough fp at wot above 4k
there is an episode of engine masters on www.motortrendondemand.com that compared carb vs efi. the efi was a dog on a dual plane but ran circles around the carb with a single plane. Just my 2 cents
make sure the holes in the adapter (tbi 2 carb) are the same size as the tbi you are using. if mismatched can cause a very hard to find vacuum leak. also check the length of the tbi hold down...
how much? answer PM
the first adapter plate was for 2" bore and would not work with the 1 7/8 bore. vacuum leak due to tbi too close to the opening. got the smaller which locates the tbi in the center of the intake....
we did a mild system for drivabilty. we put a edelbrock 3701 with an adapter plate because the aluminum aftermarket heads would not allow the tbi manifold to work. we think the heads with the big...
I am having problems with fuel flow. the back 2 cyc are running rich to the point of fouling the plugs. We think it maybe caused by the adapter plate not evenly putting fuel in the intake. this is...
Yes, I know it does not control the tranny so how is the tranny controlled?
what is your tranny? are you still using the factory chip in the ecu? have the same truck and a 350 and been tuning it but we have fuel delivery problem with 2 rear cylinders running rich. think it...
Has anyone installed one of these units FiTech 4 barrel EFI systems. Thinking about using one to replace the TBi in my OBS 1994 350/4L60E. Just wondering what problems would we run into.
match the adapter bore size with the tbi as there can be a vacuum leak. We had a 2" adapter with a (
I believe ) 1 7/8 tbi and the gasket had a very small area for sealing, changed to smaller...
sold
sure do pm at Loydw@aol.com
sounds like a neat install, picture?
turn off the file indexing found on the hard drive properties. this speed up win 10 a bunch. if 7 works for you don't switch. why fix something that ain't broke...
we had a the same problem with a 350 running 350 tbi on an adapter plate. there was a vacuum leak caused by the gasket set. replaced the plate, new gaskets and it ran much better. so make sure no...
bump
Finally at rest and peace, no more pain. You will be missed
IHS
bump
So glad life is looking better, listen to your therapists, they can really help with your completed recovery. God bless you and your family
Loyd
Mark, praying for you and the doctors, get well
almost new (never ran) Edelbrok 3704 TBI intake. $125 or BO it list for $299 in summit
sold
follow the tutorial for tunerpro and you will need to download at least 2 files and maybe 3. these files depend on what computer you have. use tunerpro xl cause then you can log data for a custom...
Got the data cable, downloaded and installed turner pro RT, found and download the files I need for the v-6, got rt to see the cable and I'll be darn if the first time I hooked it up to the truck I...