I have 5 DRAC modules.
FREE…. pay for shipping!
Steve
Type: Posts; User: Opas69
I have 5 DRAC modules.
FREE…. pay for shipping!
Steve
PARTS ARE SOLD----THANKS FOR LOOKING
TBI Parts for sale. Moates ALDU and CABL1 cable, G1 memory adapter,HDR1 Memcal Header, ZIF socket, 4 2SF512 chips, 2 32 pin Dip Sockets.
2 stock chips(1 AKRZ...
Interesting on the Firebird!!
You are in the ecm's farther than I understand. I believe the 7747's had lean cruise. I don't think it was hacked later. Not for sure.
Glad you are making progress.
Your firebird sounds interesting. What diesel engine?
I also had some difficulty with the TCC controls. Between the conflicting theories of operation around and...
I have not yet attempted highway lean cruise. I just looked and I also have what looks like bad AFR values in the table and max MAP is 37.29. I am using $42-1227747-V5.9.3.xdf. Something may be...
Try looking at the parameter- Hiway-Min Coolant under Highway Lean Cruise. When that gets changed there will be a few negative things happen. Two in particular is no TCC lockup. The other it will...
Sorry. Just saw the timing/tcc post by kevinvinv. I think I will go back to my original AMUR bin and try again. In the meantime if anyone has any ideas, please let me know. Thanks
I have 69 Camaro, 355 with 700r4. I have been tuning/running a modified AMUR bin. I have had a fair amount of success tuning but cannot get tcc to lock. If I connect terminal A and F on ALDL while...
I have raised "cold cts threshold" to stay in o/l. It still goes in and out of o/l, what am I missing?
I am using an .adx file (7747 ecm) that Eaglemark has added several patches to. One of the patches are a few dashboards he has put together. As I look at the values for the AutoProm 1 WB AFR in the...
Got it figured out with the help of Dave at Moates. Had a small soldering error that made six pins common on the G2 adapter not five. Thank you to Dave at Moates, what great customer support!!
Changed com4 to com3. Now I can connect and read data with stock AMUR chip. I have tried two 27sf512 chips using AMUR and ASDU bin files and cannot connect/read either one. Would not think two bad...
I will try that in the morning. The only thing that I can tell that happens when I turn the key on is the fuel pump relay comes in for a few seconds.
I get nothing on cel. When I set up com4 aldl cable checked good. Checked wire from ALDL connector to ecm, they are correct. When I burn chip Flash n Burn says it is good. Maybe ECM bad?
I am needing some help. I have loaded an AMUR .bin file into TP5. I have loaded $42-1227747-V5.2.adx and $42-1227747-V5.9.3.xdf data files also. When I call up the dash to see TPS values and battery...
Getting ready to start my engine tomorrow or Tuesday. I will need to break in the cam. I have a WBO2 in and working. I am hoping that I will be able to run some where around 12AFR for the break in...
I have not started it yet. I will put the timing back and reduce the BPW. If I remember it is 135. Should I reduce it 10%? I do not understand exactly what the BPW and Spark Advance Hack would do for...
I realized that $42-1227747-V5.2.adx and $42-1227747-V5.9.3.xdf are the files to use. These files are loaded with parameter information. THANK YOU to whoever has written and added all that info. I...
Changed chip in ECM. Loaded Tuner Pro RT Ver 5. Downloaded AMUR .bin file(89 GMC 5.7 700R4). Thought this was good fit as my setup is 5.7 with 700R4 in 69 Camaro. I am guessing I should use...
I was just curious if anyone doing these swaps was near me. I live near 55 & 270. I am using a 7747 AMUR in my 69 camaro build. I will start wiring soon and hopefully running in the spring. Steve
I am reading that I should use Lambda not AFR for tuning. Who has the most reliable package? I am working on dash and would like to incorporate gauge. And do I need it to log or just get help when I...
Let me finish my build so I make sure I have a good one. If you are still in need at that time I would give you one.
Sorry for the confusion. I decided to use all the Moates parts and most of the other parts. I would get rid of the 8625 ecm and a drac module or two. Thanks, Steve
New car build, just doing the hardware side of the tbi swap now. All the parts are from a 350ci GMC van. As I know very little about tuning I will dig deeper into that before startup. I will dig...
My sbc engine is 355 ci, 9.5 cr, melling MTC-1 278/288 .421/.444, 193 heads, stock tbi intake/throttle body, headers w 2 1/2" dual exhaust and 700r4 going in 69 Camaro daily driver(hopefully...