Think ur gonna have to spray that thing to get into 13's. Lol, jk. But pickups are relatively heavy and it's going to take quite a bit of power to put one in that range...much more than it would a...
Type: Posts; User: Engine07
Think ur gonna have to spray that thing to get into 13's. Lol, jk. But pickups are relatively heavy and it's going to take quite a bit of power to put one in that range...much more than it would a...
Thanks for taking time to post those. I would think I could put a table together from those that will get it up and running, with the knock sensor should keep it safe and get my fueling where it...
I was thinking that but not sure. I'll test it out in the morning just to be sure. Actually nevermind I know it does. Wasn't thinking. Heater core was out in the blazer I'm helping my cousin in law...
So I guess since it needs the water bypass, I could go from pump, up to passenger plenum, out of driver plenum, into bypass port and problem solved? Guess I can see how it does lol
On the heated plenum question again...I know the older heads had the exhaust crossover the vortec style heads do not have. How are you guys with vortec heads solving the cold weather issues? The...
Go to the top of the page click forums, then gm efi systems, then gm bin files and wiring diagrams, then find your ECM number on the list, I think it's page 2 if you have 7747, then there will be all...
Gotcha now. Never used them before. Have to go look at my engine and see what I can hook them into
By the hot water heated plenum are you referring to the water bypass being hooked from the water pump to the front of the manifold Brian?
Professional products crosswind?
I thought they all were except the air gap, but it doesn't look like any of the edelbrock vortecs are
Would love to see those timing tables...that would be awesome!! I had no idea where to start with the tuning. Had read several posts where it looked like they were setting lb hr a little lower than...
I'm about to order my cylinder heads finally, lol. After reviewing all of the options and parts used I am going with the edelbrock etecs. Nothing against the other heads looked at but these have some...
Hey thanks for reminding me about eq heads. I am going to give them a call tomorrow and see if they can do something with a slightly larger chamber size. Mostly my issue with running a factory style...
I'm not very experienced with the tuning of these at all yet but just reading the post seeing that you said the locked timing had it working until you added an e-fan, just thinking but is it a...
That sounds like a sweet build fast. I had the thought of the s10 converter but my worry was if it would be strong enough or not to hold up behind the torque the engine would be pushing in the truck...
I had questioned how well the 383 would tame down the cam but looking back at some dyno tests that were done with one the dynos didn't show any numbers below 2k rpm but the torque was already at 400...
Well, got a day off work today so I now have my front ifs back in the truck. Got it all filled up with fluid and was ready to try it out. No 4x4. Lol, had to make a trip to napa for a new actuator....
No prob at all Keith. I appreciate all of the suggestions especially for street efi combinations. I have built several engines but they have all been full strip max power type engines or off road...
Another question about the vssb. My truck has a PXT in it. I have a spare one that is PXX, different number but is already swapped for 4.10 gears. Will it work in mine or will I need to pull mine and...
Thanks for the links I will definitely check that out. Yea the pattern sat slightly high but was on the tooth fully. After about 20 changes that was the best I could get out of it. Seems to drive...
Well, this rain and snow is definitely slowing me down some, but progress is still coming. Got the rear axle in today, the bigger brakes from the suburban core axle was a good idea, but the parking...
Ok guys, another question...looking around for parts and I located a holley 670 throttle body for pretty cheap. What are you guys experience with quality of these? I have heard about injector seal...
On the ECM there will be a sticker that will have the model number. If you can post the model number it'll let everyone know what files you need to work with for that ECM. Any chip you get will...
At least that way you can datalog and send the tbichips guy the info to burn a new chip from and guys here can see how it's changing the engine.
Yea that's a little haul, lol. If you can post the number off your ECM so everyone knows which one you have, you can look under the gm ECM bins and definition file link on here and find the files you...