I have Tunerpro V5 RT where you can emulate and receive real time data for tuning on the fly. If it works in pass through mode that should tell me that its a problem with my Tunerpro or laptop...
Type: Posts; User: texmonse
I have Tunerpro V5 RT where you can emulate and receive real time data for tuning on the fly. If it works in pass through mode that should tell me that its a problem with my Tunerpro or laptop...
You right to use pass through the APU1 cant be connected to the ECM with its ribbon cable. Ive tried to use the APU1 and chips before to acquire data but not in the pass through mode. I guess Im...
Thanks for the info but yes I have changed the checksum to AA after finding out about that the hard way. I havent tried using the pass through feature it might at least let me rule out cables, ports...
Afraid Ive been down that road already its not the emulation thats the problem its the data acquisition thats not working. When I use the DA connect button (two little arrows pointing in opposite...
Hello thanks for getting back to me. The truck runs good enough with either one of the chips Ive burned or attached to the APU1. No on the inverter and I did try different USB ports but only have one...
I've recently fat fingered something and cant figure out if its a computer, Tunerpro or equipment issue. Data acquisition is no longer reading. I have TP V5 and the moates APU1 system on a 95 K1500...
Hello and thanks for having me. Im not new to tuning Ive been using megasquirt for a couple of years but now Im going to try to use moates to tune a 95 5.7 TBI so wish me luck.