Does anyone know what table controls the "accelerator pump shot" on a 2002 truck ecm? I am using this setup on another brand motor and need to richen up the fuel on a throttle transition.
Mike
Type: Posts; User: silvergs
Does anyone know what table controls the "accelerator pump shot" on a 2002 truck ecm? I am using this setup on another brand motor and need to richen up the fuel on a throttle transition.
Mike
Unfortunately I don't have another sensor to try. This is a new sensor but that doesn't mean anything. I am leaning towards something about the signal going into the ecm not having enough "load" to...
P0343
Scott,
The VOM meter shows 12V high and 0V low but still sets the code. Wish I had access to an o-scope.
For the crank sensor I just took a stock ls 24 wheel and mounted it on my bottom belt...
I have a Buick 455 with a 4L80E running on a LS 411 ecm. I am using a Grand National distributor that I have cut half the "hat" so it gives a signal of 180 on and 180 off. It runs good but will set...
Skinny Pedel hit it. I didn't have the timing up far enough on the high KPA side. It started to come around and then suddenly got a no start issue. Well after a lot of messing around with...
Here's the latest file. I just can't figure out why the timing is dropping off so far at an idle. Haven't gone through much more than that at this time.
Thanks for the feedback guys. I know its a bad choice for a cam but it is what he put in.
I have the idle timing set at about 30 but it never gets over 10 or 11. Don't know why. I will hook the...
Got a customer that dropped off a 1997 1/2 ton that he rebuilt the motor on and installed a "Thumper" cam. Bad choice on his part but I am trying to get it to idle and run halfway descent. My issue...
Playtoy
I helped my nephew put a 6.0 in a 89 Camaro. We redid the harness and got it running pretty good. (12.50's on street tires) While playing with it I tried to flash a Camaro os into it to...
Thanks Hog
I have a couple of supercharged applications coming up and will need some custom help on them.
Mike
Hog
You have any idea when the Monodax forum will be back up? Theres a lot of information there that I would hate to lose.
Mike