The 16263494 ecm has a separate abs control box off to the side.
Type: Posts; User: Davis_1377
The 16263494 ecm has a separate abs control box off to the side.
Thats the biggest mod i want to do. Will the 12200411 ecm plug right in or do i have to repin or reprogram? Is the 12200411 better than the 16263494 ecm?
One of the mods i wanted to do was pcm controlled electric fans but i heard this pcm would not do it and there was another pcm that would do it but dont know what it would be.
Its a 4.3 v6.
Anyone?
Was looking for ways to make some changes to the 16263494 ecm for 2001 s10 blazer. Is there a way to remove a chip and socket or is something like roadrunner required? I really only need to change a...
Ahh i understand. I just heard bigger cams like more fuel but havnt tried it, i been tuning my ve tables for 14.7:1 so running more rich was something i havnt actually tried other then for a idle. I...
That would work good, would the o2 correct it tho?
Thank you, ill look into that, that seems like the best option.
No im running a larger cam so i want to run it more rich where it should be for the cam.
Wanting to run more rich for a bigger cam, what it the best way in tunerpro rt for 16197427 $0D to adjust air/fuel ratio? I know adjusting ve tabels but aint that corrected with the o2 sensor?
I see my problem. I must of been using the older .xdf I found $0D Fan Control v100.zip and it had the scalars I needed. Thanks for yalls help.
I don't see it in the instructions how to change the transmission fan to 2 engine fans. Looking in tunerpro rt i see some scalers and flags I don't see option to change this.
Anyway to change coding to also use fan #2 output as engine temp instead of trans temp? Im wanting 2 temp settings cause my fans have low and high. Very efficient as on colder days the temp is...
I set Lower IAC Limit and Upper IAC Limit both to 0 and it fixed the AE going active at idle and AE still works as normal. Can someone explain what these 2 settings actually do?
It dont seem like its making much difference in rich/lean but with iac opening and injector DC constant i guess it would make it more lean. I moved %IAC Flow and AE still goes active and I can't feel...
Is AE vs. %IAC Flow Difference the same, this is all I see?
Yes, when AE goes active i can see 2 to 5 IAC steps added, i have to playback slow and watch the monitors page and i can see the IAC spike everytime AE is active.
Sometimes it does it more often like when its in gear. I moved the map difference for ae at idle hoping to fix the problem but doesn't seem to affect it. I was hoping to keep the choppy idle as its...
No one?
AE going active at idle, ive tried changing map difference and several other things with no luck. Running a big cam and map readings are pretty well consitant, cant figure out what else to try.
Ive tried emulating as well still no data tracing
Ok thanks i do have a Bluetooth elm327 mini but i couldn't get it to connect with anything that's gm using the torque app, i think cause the elm327 mini was a older version.
Looking for a good way to data log obd2 stock vehicles. Right now kinda needing to monitor pressure control solenoid witch none of my scan tools can do. I currently have tunerpro. Planning on getting...
How do you get data tracing to work with this ecm using $0D? I didnt move the serial data wire from pin E to M when i converted, i still get connection with Tunerpro RT but no data tracing.