Thanx guys, i've already fixed it and it works.I was trying to get data from 1 byte, not 2. Time after time.
Type: Posts; User: yoheer
Thanx guys, i've already fixed it and it works.I was trying to get data from 1 byte, not 2. Time after time.
Can't make MAF work
A274 GM datastream description
ALDL MODE 1 MESSAGE 0 DATA LIST
Word #46
GP6EAFND GMP6-E NON-DEFAULTED AIRFLOW (MSB)
I get value 2 at idle
If I use math function...
I appreciate your help
I'll check math function.
It is SLC2 Free by 14point7
This is what i found
0[v]@0.68[Lambda] linear to 5[v]@1.36[Lambda], 10[AFR] linear to 20[AFR] equivalent for gasoline
I get ~128 values at idle. Very similar to blm.
Is it correct? How to convert it to AFR if yes?
10-20 afr wideband
Also I have an issue with MAF
It is mode1 msg0 word47
GM/SEC = 512N/65536
...
Exactly what I wanted to hear
thnx, I'll check
I believe it is mode 1 msg 0 byte 55 ALDL message
and it is not used in description
I want to add wideband reading. Using Kur40's pcm patch with d31 or d27 pin.(eehack uses pin27. d31 in the patch description)
What datastream data should I use?
It is written Byte 36 mode1 msg1...
And bluecat 3.42 tables are almost the same as original 3.23 :)
Im just trying to say that tables generated for a stock car by bluecat differ from original tables.
3.23 orig vs bluecat normal shift tables @100% throttle
2nd - 36 vs 42
3rd - 73 vs 80
4th -126 vs 133
Won't it stuck in a gear with a rev limiter even with 3.23 gears?
Thnx a lot
Im trying to compare Bluecat data with OEM
Original table seems to be more agressive than Bluecat.
What am doing wrong?
Could you please make a picture with parameters for a stock f...
Does anybody have decent tables for 3.42 rear end setup?
Are D-body towing package tables good enough for f-body?
Can this patch be upgraded to turn on the pump when a certain temperature is reached? And turn off after it cools down.
I want to use an additional external electric pump with an extra radiator...
It is byte not int?
coolant and trans temps are int
upd
Oh i see my mistake. I used wrong datastream
I'll check
Hi. Im trying to adjust my arduino gauge
I cant get IAT data.
Trans temp and coolant works
I believe it is A274 datastream
All I get is negative 40 always.
Word 25
MATDEGND NON-DEFAULTED MAT...
I have a big cooler alreagy.
Did you like your setup and driveability
I have a low end torque stock cam .
And now it is sluggish untill hammering the pedal.
I dont like it.
What is stall wall?
Thanx for the info.
Is it strong enough? I mean V6 converter.
I have a good healthy transmission.
Im afraid it can be damaged if the converter is destoyed.
It seems weird that 2,075 rated...
I've swapped a rebuild v6 S10 converter to my LT1 Trans Am. 2.73 gears
Original TC is rated at 1,397 RPM
S10 converter is rated at 2,075 RPM. I've made a Brake test and actual stall is about...
12614088 Tahoe?
16212461
95 vette A/T 3.07
Export model (Emirates/Russia)
metric gages
No o2s sensors
no cat
emissions disabled (EGR DFCO AIR pump EVAP CAT)
OL only (lean)
I mean i tried both
Im using wideband in PE areas and narrowband in CL
Both are showing lean. Wideband and narrowband. Whe the area was ok both showed ok
Who can explain me one thing
It seems weird
SD mode.
When I try to adjust some areas it influences adding/removing fuel in the whole range. But the values are the same.
For example i have a VE...