Made a full bin for 7603 OS and add some files for comparison.
The xml file need to be extracted to tuner folder.
Type: Posts; User: kur4o
Made a full bin for 7603 OS and add some files for comparison.
The xml file need to be extracted to tuner folder.
All files are manual trans, but a segment swap might cure some of the issues. The only change I could find is speedo calibration, and one file have 2 different system segments.
There is a file for...
After long research for a very long time, finally here are the bins for L31 engine exported to Mexico running ls1 style PCM.
Managed to get for 2001-2007 MY with different OS being used.
The...
Can you try pcm hammer with j-device selected, and post debug log.
You can test logger if it have actual communication in dtc tab when connected, test some random buttons.
The update might not have completed successfully.
Here is some other user with similar issue fix.
Can you test with j2534 device selection, in patcher and hammer.
Which obdx device do you have.
You can try to get latest drivers from their website, and upgrade firmware if there is any.
ANother test will be to get it working with universal patcher logger....
Hooking a charger is real bad ides, regulated filtered power supply is much better.
You need to select device as serial with comport.
I have a copy of the first one, but you need special otc adapter to make it work. It doesn`t work with t2win.
Getting some random module errors, might be because pcm don`t send needed data on bus to modules. Do you have a way to read DTCs. Idle data can be configured, but the biggest issue is the pcm to tac...
From p01 OS only 12216125 support flex fuel.
You will need to tune from scratch or goto p59 route.
You need to find a 2002 vette bin with OS 12216125, for base file, Than apply the flexfuel patch.
There is too many parameters that are not visible in bin, and it is not possible to copy all of...
I think for such a big files, you can upload them to dropbox or mega, gdrive also have upto 15gb free storage and post a link.
I have all of the latest updates from 2008 disks, need anything older to make a better library with earlier revisions.
I dig out an old copy of tis2000, for opel brand. It have some instruction for t2 update. Here is the file.
Not exactly, if you find an older copy of tis2000, around 2001-2005 you will be able to download tech2 software to tech2, and read back the pcmcia card. Each version of tis2000 will have its own...
Can you give some info what is on these disks. Do you have a running program from them.
Usually t2 cards can be extracted from tis2000 but they are split in smaller files. A software download can...
I have some old versions but v27 seems the oldest. It should be from 2007. That old cards are likely 10mb in size. Not sure why you need these.
If you have old tis2000 disks, the cards can be...
You can get one time burn chip [eproms]. If it doesn`t keep state the chip is for the trash.
All tables are mph vs tps, only WOT have some vs rpm threshols, but there is also another one that use mph so it is not clear which one is triggered first.
Usually rpm is not good for changing...
You will need some log with eehack during startup, maybe something is out of spec.
Than figure why it dies, lack of fuel or air or extra fuel, When cold fuel evaporates slower, and it may peg down...
WIth universal patcher you can tune, datalog and analyze logged data, and much more.
You need to poke around a bit to get what it does and where it is located.
For simple tuning, get a ls1 bin...
Scaling the prime pulse injector constants is kind of art.
There is some write up on older threads, but will need to dig it out. Usually you need to convert the pulse width to grams of fuel, than...
If you want the best around, a chines clone MDI unit is quite capable, A little expensive and bulkier but is the most versatile. Have wifi, lan and usb.
Next option is lsdroid home brew cables,...
DOes it have some form of hard reset button, or some button needs to be pressed while pairing.