Runs like a champ still, selected p66 utility in flashhack, read and write with vats deleted, still no dice. would not crank so traced the fat purple wire to the starter solenoid and jumped it out at...

Put the pcm back in the car, still has security light. this thing is a different animal. I don't know what all to change to make vats go off . I disabled vats and maxxed out values on the HZ...

Went in to tools selected p66 on my desktop. Read and write in about a minute each. I had a power issue though and that's why it wasn't connecting. It would have worked in the car if I just selected...

Got it to read and created BIN plus loaded p66 XDF File . I am rather perplexed by the BIN File. This Might Take some Time. It is working now as far as I can tell.




Disabled VATS and Maxxed...

Went to desktop with my ALDL cable. Selected p66 Flask tool "includes 3.4l" She's talkin now. I don't think I fried anything I figured out where my power issue was. Sure ill have a problem creating...

No TSIDE communication. Whatever that means. OH no I fried it.

It says EE Bin Converter in tools so im assuming that means EE Flash tool. I only have a snapshot from De-Bug in car with my computer hooked up. Trying to think of a way to host it , hold on.

Still never worked though from the beginning. I just ordered a spare Pcm from ebay . Kinda makes me mad to get it towed here where I have everything its like $120 and its less than half a mile from...

Shouldn't have if I had no ground on the black, everything was dead. Had some connection in the car but something was keeping it from reading.

I tried all that, so I pulled this pcm out and have it on my desk right now. wiring is hooked up as follows Black plug, 30 and 31 12v, Blue plug , 3 12v, 1 ground, 30 serial data. Still doing the...

I hooked up to the car and tried to read the calibration and no success yet I'm waiting now. hopefully the vats just has me locked for 10 minutes or so. Successfully connected to ALDL Bus and...

I bought the car this morning. $300 plus a little trade on some items. Apparently the battery is junk. I'm going to try flashing it tomorrow if it runs and rives I will just clean it up and drive it....

I already snapshotted a diagram of both ports for 94 and 95 Camaro. Clicks but no crank, its been 4 days since I looked at it for the first time briefly. The keys supplied measure 7.5k ohms. I will...

I crawled up under there the other day. Could hear the starter relay clicking. I will get on my tuning laptop and load the xdf. Im owing Steveo beer now. This one actually uses the regular 0bd1 port...

I have been keeping my eye on the car for a while, chilling like a villian with weeds growing up around it. The story is the owner lost the key so I talked to the guy Dakota who bought it and was...