I was wondering if anyone has any tuning files that I could use with tuner pro and tune my 1997 formula firebird with.
I was wondering if anyone has any tuning files that I could use with tuner pro and tune my 1997 formula firebird with.
What are you trying to accomplish ? More information is needed. Stock motor... Modified motor setup....
to tune that ecm you need both a working XDF and a working flash tool. tunerpro doesn't do reflashing.
here's an interesting thread where that ecm is dissected and worked on, i'm not really sure if it's resulted in a good working XDF file yet but there is really good progress: http://gearhead-efi.com/Fuel-Injecti...light=lt1+obd2
not sure of the progress of a free flash tool, i did plan to work on one and do have some experience with that stuff, and was given a lot of collected info that might make it possible, but i don't really have enough time right now. maybe this fall. i know tom h was working on something too, not sure of its progress.
so, it's really early days for free/cheap tuning with that ecm, which is funny because it's 25 years old
we've really blown the doors off the 94-95 ECM, though, and you can very easily convert to an OBD-I ecm if you want to, that would let you use flashhack, eehack, and tunerpro with EEX which are all tools i've developed for free and they're well tested with a huge user base. lots of people have done that. very minimal modifications required to swap to the older ECM.
Would you recommend that I convert to OBD-I then? I'm super new to all of this stuff and just want to know where to start my car has heads and a cam that I didn't install but it is running rough on start and super rich all the time.
THEY are NOT Lying to You.
You are NOT Even Lying to Yourself.
You ARE Being Lied to ... by Your SELF.
The Last Psychiatrist, aka ... Alone ...
don't you just use the knock module from your old ecm ?
i seem to remember that works but not 100% on it, it's been a while.
Bookmarks