Looking at running OLSD permanently. Have the tune pretty close in CLSD. VE tables are as good as they are going to get and PE mode is dialed in. Still having issues with split BLM at idle. Plus the car seems a little more crisp and consistent on open loop.

Do I still use the VE tables to adjust the fueling for open loop? Does the Open Loop AFR target table come into play at all?

Lastly, I can get trimalyzer to show my WBO2 readings vs MAP and RPM. Would I just use this data to adjust the VE tables point by point manually or is there a more automated way like when using the fuel trims?

Thanks for any input!