Hey Guys,

I've got a 79 Camaro that I've been working on swapping over my free weekends for the past year. I've got everything in the car, wired, tested and I can't get the thing to fire up. I've checked all my wiring, fuses and grounds at every point I can think of with the key in both the "run" and "start" positions. I even got a new crank position sensor, and my logging software shows that the engine is cranking at roughly 165 RPM when attempting to start.

My problem seems to be spark, the ECU will just not send a spark signal to the coils. My hot and ground wires to coils and injectors tested good all around. I've verified that VATS is disabled in TunerPro multiple times now, and I've re-flashed and retested with two different PCMs. Anyone have any good insight on what I could be missing? Any help would be greatly appreciated.