GM Bin Files

[Wyatt]

Looking For Some Help Finding Software And Files For A 2006 Pontiac Montana SV6 3.5 V6 FWD

I have TunerProRT And A OBDLink SX


20210828_142358.jpg

[In-Tech]

That could be a number of different ecm's. Take it out of the holder and flip over, it should have a casting number between the ribs and hopefully it says e38.

[2xls1]

Google that service # and it has 3 connectors so it's not an E38. Probably E67. And that vehicle is not in Tunercat's supported vehicle list. It is in HP Tuners supported vehicle list so there would be no way to save it as a .bin, only as a .hpt file. And I don't believe any of the free programmers do any CAN Bus vehicle ECMs yet. And even if you could get a .bin there would be no way to look at it other than with a hex editor.

[Wyatt]

Thanks I Keep Trying To Find A Way Or Buy HP Tuners

If You Find A Way Please Feel Free to Drop By

[In-Tech]

Google that service # and it has 3 connectors so it's not an E38. Probably E67. And that vehicle is not in Tunercat's supported vehicle list. It is in HP Tuners supported vehicle list so there would be no way to save it as a .bin, only as a .hpt file. And I don't believe any of the free programmers do any CAN Bus vehicle ECMs yet. And even if you could get a .bin there would be no way to look at it other than with a hex editor.

Definitely not an e67, probably a p04. Good call on checking the service number, I was being lazy lol

As far as NO WAY to get a bin file, all you gotta do is log the traffic... Not an easy task, as you mentioned.

[Wyatt]

it is not a P04 ,E67 ,E38


I think it is a E40

[ev1]

GM Tech2 Scan tool pcmcia card files. we are looking for tech2 pcmcia cards or card files dated around 1999, 2000, 2001, 2002 or 2003. hoping someone has these. any leads on finding these would be greatly appreciated. thank you. ev1