Thanks, that's incredibly helpful on the odometer storage.
(0x1d460 = 119904) + (0x06 * 0.25 = 1.5) = 119905.5
I'm probably not going to post any more elaborate explanations of the odometer storage going forward. Primarily because I want there to remain some mystery in it's storage mechanism, but also because I'd rather disclose the location of the reman pin and leave the odometer to those who choose to do their homework or ask for help at the price of providing documentation of the validity of their request. If you have genuine interest in knowing it's function PM me and I'll share information commensurate with how much I trust you and your motives.
Meanwhile, I've discovered what I described to steveo as a "rotten easter egg" in the firmware. Once completely re-assembled and having some miles racked up on it, I've come to understand the following:
There are numerous rules regarding when the CCM enters sleep state. Key left in ignition being one. But I've painfully discovered that once the CCM has seen the engine running (i.e. a drive cycle) it will remain awake until it sees the left / driver's side door pin switch indicate it's been opened and closed. No vss counts / distance traveled need be observed. Once the CCM has seen engine RPM (presumably via the PCM's 41 response message) the unit will stay away for hours, days, possibly weeks or months until the left / driver's side door is opened. This is generally not a problem on a semi-daily driver or any other car operated somewhat normally. But once the battery has been drained to about 11.8 volts there's another module not directly related to the CCM that will start cycling a relay off and on again until the battery is drained to about 7.5 volts, where said module ceases to function. In terms of 12v FLA batteries, this is well beyond the point of no return.
Note how I park the car normally.
IMG_20211013_191155036.jpgIMG_20211013_191207026.jpg
Made necessary by the amount of crap stored in my garage, my parking methodology was meant to prevent my wife from dooring the f**k out of my side mirrors and / or doors when exiting her daily driver. Normal parking procedure involves backing into the garage at an angle, cutting the wheels to the right, exiting the vehicle and then rolling it several feet back into final position by hand before setting the parking brake through the open side window. During the colder months I would regularly perform this procedure and then leave the engine running while I maneuvered around to the passenger side of the car and rolled the driver's window up with my leverage aid device before shutting it off and removing the key.
What is a "leverage aid device" you ask?
IMG_20211013_192417861.jpg
It's the same device I used to depress the clutch pedal in order to start the car about a million times during the development of the diy-ltcc controller. Not once was the driver's door opened through the numerous multi-hour long development + test sessions where I would shake out bugs in the firmware startup routines. In the year and a half since I've come to learn my neighbors found much loathing in hearing the sound of my car's exhaust note late at night.
I'm fairly certain this "rotten easter egg" explains 95% of my battery drain issue. Laugh if you must.
So here's the reman pin connected to output pin c14. Inboard on the unpopulated 40 pin IDC header, fourth from the end.
IMG_20211007_134727479.jpg
Reply With Quote
Bookmarks