Results 1 to 15 of 511

Thread: Corvette CCM Reverse Engineering Anyone?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Fuel Injected! spfautsch's Avatar
    Join Date
    Apr 2015
    Location
    Montgomery City, MO
    Age
    52
    Posts
    883
    Let's call it IC "C" for brevity.

    I was sort of hoping for a cross reference with possibly a datasheet. But I've traced everything out except 6 pins that have vias underneath the chip. I'm leaning towards this being SPI because it has four lines direct to the cpu pins 22 (miso), 23 (mosi), 24 (sck) and 31 (pa3 - assuming device select).

    It appears to have 40 general purpose i/o pins, 12 are used as outputs and I've traced the other 27 back to sources, verified, etc. The inputs labeled feedback I assume are for open circuit detection. I'll continue to work on pin 10, but here's where I think most of these registers map to in (what I assume is) ram.

    Code:
    inputs:           register bit:
     8 ign3 (e4)                  8
     9 ign1 (e5)                  7
    10 unknown (via under chip)   6
    11 park lights on (d14)       5
    12 disarm utd (d15)           4
    13 r door sw (d16)            3
    14 l door sw (c12)            2
    15 key in sw (c11)            1 $6449
    16 hatch sw (c10)             8
    17 unlock ckt (c5)            7
    18 lock ckt (c4)              6
    19 arm utd (c3)               5
    20 defrost req (d5)           4
    21 diag mode (d6)             3
    22 unused (d7)                2
    23 oil float sw (f8)          1 $6448
    24 turn flasher (f9)          8
    25 seat belt sw (f10)         7
    26 hi beam (f15)              6
    27 unused (e14)               5
    28 m clock feedback           4
    29 data strobe feedback       3
    30 data clock feedback        2
    31 lcd data feedback          1 $6447
    32 lcd blanking feedback      8
    33 courtesy lamp feedback     7
    34 defog control feedback     6
    35 horn feedback              5
    
    outputs:
    36 low oil lamp (d13)         4
    37 courtesy lamps (d12)       3
    38 lcd blanking (d11)         2
    39 rear defog (d10)           1 $6446
    40 horn (c16)                 8
    41 chime 2 (c15)              7
    42 chime 1 (c14)              6
    43 seat belt lamp (c13)       5
    44 check gauges lamp (c9)     4
    45 change oil lamp (c8)       3
    46 door ajar lamp (c7)        2
    47 security lamp (c6)         1 $????
    It took a while to confirm $6446-$6449 because when messing with inputs, outputs become affected i.e. closing either door switch causes the courtesy lights to turn on. Likewise, when commanding outputs, some of the feedback pins change state as well.

    To jump straight to the chase, I don't think the reman pin is coming in this ic. The only input not accounted for is VSS, which I believe is handled by the cpu.

    I know quite a bit more but will only give generalizations now. All 8 adc inputs to the cpu seem to be accounted for. There's an unused one that would connect to E8 if the components were present. I think this is to accomodate another light sensor for a DRL option that I believe was only sold in Canada. The LCD outputs are all driven directly by the cpu pins PA4-PA7.

    The other PLCC52 chip labeled 'delco 16126532' which I'll refer to as ic "B" appears to handle all the PWM outputs, but that's about all I've had a chance to trace down. My guess is that it does use shared ram due to the number of lines it shares with the uveprom and what I believe is a dram chip labeled 'delco 16089396'.

Similar Threads

  1. car bogs down when switching into reverse/D
    By CAMMED LT1 in forum GM EFI Systems
    Replies: 4
    Last Post: 09-27-2021, 12:34 AM
  2. 12212156 code reverse engineering project in Ghidra
    By dzidaV8 in forum OBDII Tuning
    Replies: 8
    Last Post: 01-13-2020, 11:04 AM
  3. Help!! 93 Lt1 6M Reverse lockout
    By noeysuarez in forum GM EFI Systems
    Replies: 3
    Last Post: 09-14-2017, 08:17 AM
  4. 4l60e reverse boost valve location and procedure
    By JTodd in forum Introductions
    Replies: 1
    Last Post: 04-19-2013, 01:20 AM
  5. T56 reverse lockout options with TBI PCM
    By CDeeZ in forum GM EFI Systems
    Replies: 1
    Last Post: 02-26-2013, 05:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •