Results 1 to 15 of 511

Thread: Corvette CCM Reverse Engineering Anyone?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #27
    Fuel Injected! spfautsch's Avatar
    Join Date
    Apr 2015
    Location
    Montgomery City, MO
    Age
    53
    Posts
    883
    I've been able to change (write zero) to the VSS*/4000 counter at $b657. I've also been able to erase the option byte at $b6c7 and write bit 2 there for the manual trans.

    Edit: This entire paragraph is wrong, disregard. It seems like the 05 unlock is cleared after two 06 uploads are executed, or something... Presumably first being the write and second being the clear command to turn off the eeprom control register (turn off programming voltage). Whatever the case, it doesn't seem to be at all straightforward.

    I'm playing around with writing obscene ascii messages to the unused FF bytes, and I'm learning a lot. Fingers crossed I can figure out what the "rules" are with this mode. If anyone has knowledge that applies to flash / mode 5/6 programming that I'm missing I'd love a bit of a nudge in the right direction.

    All this considered, I'm somewhat afraid that erasing the odometer may be impossible without a patch to the (uveprom) firmware. Hope to have more, better news tomorrow.

Similar Threads

  1. car bogs down when switching into reverse/D
    By CAMMED LT1 in forum GM EFI Systems
    Replies: 4
    Last Post: 09-27-2021, 12:34 AM
  2. 12212156 code reverse engineering project in Ghidra
    By dzidaV8 in forum OBDII Tuning
    Replies: 8
    Last Post: 01-13-2020, 11:04 AM
  3. Help!! 93 Lt1 6M Reverse lockout
    By noeysuarez in forum GM EFI Systems
    Replies: 3
    Last Post: 09-14-2017, 08:17 AM
  4. 4l60e reverse boost valve location and procedure
    By JTodd in forum Introductions
    Replies: 1
    Last Post: 04-19-2013, 01:20 AM
  5. T56 reverse lockout options with TBI PCM
    By CDeeZ in forum GM EFI Systems
    Replies: 1
    Last Post: 02-26-2013, 05:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •