Inline 6 on a 0411 pcm

[Thorwon]

So, if I'm reading correctly, I can run a inline 6 on a 0411 pcm.
I'll need to put a 3x crank trigger and a 1x cam signal.
If I'm reading correctly, I can run port fuel injection and a distributor for ignition.
Can anyone confirm this? Has anyone ever done this?
I've read several posts where people said they were going to do this but they never finished the project or just never posted that they did.
I'll be machining my own crank reluctor and maybe building a custom distributor. The pcm I'll be using is a 0411 with this bin.