Inline 6 on a 0411 pcm

[dave w]

A little more progress.
Can anyone tell me what the gap should be between the sensor and reluctor?

sensor resized.jpgsensor1 resized.jpg

Nice work!

I don't remember exactly what the gap needs to be. I'm thinking about 0.040". What I remember doing to figure out the gap was power on the CKP sensor using the PCM. I temporarily removed the CKP signal wire from the computer and connected a volt meter to the CKP signal wire and rotated the engine by hand to see when the CKP signal triggered on / off watching the volt meter.

dave w