Inline 6 on a 0411 pcm

[Thorwon]

opps

[dave w]

Another Idea similar to how DUI Distributors makes the HEI Distributors for the IH V8 engines. Basically, DUI adds a spud shaft / spud housing and an IH gear assembly to an "Off - The - Shelf" Chevy HEI distributor. Perhaps a similar idea will allow an "Off - The - Shelf" Vortec V6 distributor with 1x CMP to be retro fitted to the Jeep Inline 6? Perhaps a custom "one-off" Jeep Inline 6 spud shaft / spud housing and Jeep gear assembly added to the Chevy V6 distributor?

dave w

IH HEI Distributor.JPG

IH HEI Distributor-02.JPG

IH HEI Distributor-03.JPG

[Thorwon]

Another Idea similar to how DUI Distributors makes the HEI Distributors for the IH V8 engines. Basically, DUI adds a spud shaft / spud housing and an IH gear assembly to an "Off - The - Shelf" Chevy HEI distributor. Perhaps a similar idea will allow an "Off - The - Shelf" Vortec V6 distributor with 1x CMP to be retro fitted to the Jeep Inline 6? Perhaps a custom "one-off" Jeep Inline 6 spud shaft / spud housing and Jeep gear assembly added to the Chevy V6 distributor?

dave w

IH HEI Distributor.JPG

IH HEI Distributor-02.JPG

IH HEI Distributor-03.JPG

That's what I have in mind. I'm running a big cap HEI that I did that to. But you can buy the big cap distributor for the jeep in line 6.

So I know I can modify a V6 distributor to work. But jeep makes this for the later model 4.0 engine. To bad the 0411 won't do coil near plug.FD39_TOP_P04__ra_p.jpg

[dave w]

That's what I have in mind. So I know I can modify a V6 distributor to work.

Seems like the next step is a 3x CKP.

Google shows:
Jeep Inline 6 - Firing Order 1 - 5 - 3 - 6 - 2 - 4
Chevy V6 4.3 - Firing Order 1 - 6 - 5 - 4 - 3 - 2

Details . . . Details . . . Details



dave w

[Thorwon]

Seems like the next step is a 3x CKP.

Google shows:
Jeep Inline 6 - Firing Order 1 - 5 - 3 - 6 - 2 - 4
Chevy V6 4.3 - Firing Order 1 - 6 - 5 - 4 - 3 - 2

Details . . . Details . . . Details



dave w

Well I spent a few min. looking at the reluctor angle compared to the balancer angle at TDC. It looks like it should be a simple thing to do. We'll see.
3x reluctor balancer.jpg

[dave w]

Well I spent a few min. looking at the reluctor angle compared to the balancer angle at TDC. It looks like it should be a simple thing to do. We'll see.
3x reluctor balancer.jpg

Been there, done that.

dave w

IMG_2708.jpg

[Thorwon]

Dave will the factory crank sensor pickup aluminum or just steel?