Put the pcm back in the car, still has security light. this thing is a different animal. I don't know what all to change to make vats go off . I disabled vats and maxxed out values on the HZ settings for vats. Doesn't run yet. security stayed on when I took the key out so something isn't right.
Do you have the vin of the car. You need to select vats off bit and don`t worry about the HZ.
The vats module also commands the dash light so unless you put a correct value resistor it will stay on. Does the engine cranks or there is no crank at all. Or does it start and dies immediately. The vats light should be flashing too, not solid on.
Posting Permissions
Reply With Quote
Bookmarks