I've been logging and tuning and it has been going well. I had an area where VE wanted to be over 100. So I dropped the fuel rate in the settings which brought the test of the table down but I still have cells that want to be over 100. I'm running the stock injectors up at 20psi. I have adjusted the fuel flow all the way down to 90lb and still have a series of cells that are at 99 and during my last drive it still maxed out the BLM. The rest of the VE is fine with my lowest value being about 52.

I can keep dropping the fuel rate values but how far is ok? I mean I guess it is really just a number in a calculation so theoretically it can be a low as I need it to get the table in line.

So this is probably just a sanity check posting. How far below your actual flow rate have you needed to go to get your VE under control?

7427 ECU.