Hi everyone.
has anyone got a .cal to suit an 0411 swap into a 97/98 5.7L L31 4x4 suburban with working 4LO?
thanks
Hi everyone.
has anyone got a .cal to suit an 0411 swap into a 97/98 5.7L L31 4x4 suburban with working 4LO?
thanks
If you change to a 0411 PCM, it'll open a lot of options for you.
Check out this thread.
http://www.gearhead-efi.com/Fuel-Inj...9&pp=15&page=1
Sorry, posted in the wrong thread.
Last edited by Thorwon; 12-06-2021 at 06:30 PM.
What tables/switches/constants need to be filled out to have working Lo range?
The transfer case controller in my 99 K1500 is separate from the ecm/pcm. The TCCM signals PCM when 4LO is selected.
The attached 2002 Van calibration has "4WD" enabled in options, Transfer case "low range" settings appear to be correct, and the transmission tables related to 4WD lo appear to populated. I'm happy to look at other tables and possibly copy/paste data if needed.
This is a 4L80E cal so you'll want to change transmission segment / values for 4L60E or copy 4WD values into a 4L60E based calibration.
I looked through that cal...and not sure it will work.
is it for an L31..or an LS1?
I see it has the 4wd option ticked...but cal info says its a 4x2 truck
Also...336kb as opposed to about 487kb...I think for the express van tune.
I'm loading this tune as a favour for someone whom lives interstate...so I want to make sure it will work for him.
thanks for your help.
This is a 5.7 10,000 lb GVW Savanna / Express van calibration that I collected from one of our fleet vehicles several years ago. Many of the L31 dual wheel van calibrations I've collected have been 4X4 calibrations. I often wondered if that was done to allow Quigly and other 4X4 van builders who were GM partners to sell emissions legal vehicles.
Bookmarks