Fly by wire GMT400???

[Hquick]

Sorry for all of the questions…been so long. Playing a bit of catch up.
Has anyone ever put together a tune for a ‘Drive by wire’ setup on an L31 GMT400 with 0411?
Is it possible?

[dave w]

I'm not sure it's practical or affordable to use the 0411 for Drive by Wire. Most Drive by Wire '0411 parts like the "Throttle Control Actuator" and "Throttle Body" are not well supported by the aftermarket.

dave w

[Hquick]

For my Australian Suburban…it would have made re-positioning the throttle body a LOT easier due to cable run, Cruise module etc. would mean I could mount the TB anywhere I like.

[Fast355]

Sorry for all of the questions…been so long. Playing a bit of catch up.
Has anyone ever put together a tune for a ‘fly by wire’ setup on an L31 GMT400 with 0411?
Is it possible?

I have done one in combination with a CNP ignition and 24x swap.

[Hquick]

How difficult was it to set up a tune for it?

[Fast355]

How difficult was it to set up a tune for it?

Was not too difficult to be honest. I used an 8.1/4L80E van tune as a starting point.

[Hquick]

I have a brand new P59 here…think I’ll go with that 👍