great read, thank you. So if I understand correctly in whatever editing program (TunerPro, Tunercats, etc) I use just zero the actual offset and add my estimate “offset” to the Base Pulse width, anyone correct me if I’m wrong. Sounds easy enough! Thanks Tayto
edit: I understand offset/ lag / dead time doesn’t need to be perfect just want to confirm this is how it’s done.^^
1-30-2022 Edit: If you use TunerPro, injector offset is set in the BPW table, select offset and either add or subtract offset. To whom it may concern, don't get caught up on offset, it isn't THAT big of a deal. You have a few choices for finding offset: your injector factory specs, or get the injectors 'tested', OR add rough estimates into the BPW table as I described at the beginning of this paragraph. Hope this helps someone.
Bookmarks