Hello,
Just started chip burning with the moates apu1. I am able to burn the chip and verify but after install and 2 min warm up the CEL blinks and car goes into limp mode.
I have tried two different chips and the emulator on the apu1.
1989 Firebird TBI
1228746 ECU
27SF512 chip
moates apu1
g2 adapter with ziff on ECU
I have a separate ECU running the factory chip AXKT.bin and it runs fine. I have tried a downloaded bin, the bin I read from the chip and both give CEL.
I am using the $61.xdf if that matters.
Bookmarks