Hi - I read that the people behind TunerCat were the same people behind Jet DST so I thought I'd ask this here.
Does anyone know what tables in Jet DST correspond to injector pulse width?
I have a 2005-2007 5.3L in a Mazda B2200, I changed intakes and injectors for hood clearance reasons. The stock injectors were 25.2 lb/hr, the new injectors are 28.8 lb/hr from an LS6. I found a .cal file on this forum from a 2002 Corvette with an LS6 so I changed the injector flow rate vs vacuum table as well as the Injector Offset vs battery voltage vs MAP table on my 5.3 ecu to match the LS6 values.
Everywhere I read people say you also have to change pulse width when you change to larger than stock injectors but none of the tables in Jet DST say pulse width. Does anyone here know another name for them?
Thanks in advance.