Hi, new to LS swaps but not OEM systems, been professional mechanic for 40 years.

Recently installed 05 LQ9 DBW in my 99 Denali 4X4 4L60E. Fresh bearings, rings, Summit Stage 1 cam, LS6 valve springs, 2010 truck intake w/35 lb/hr injectors, initial tune by Brendan (LT1Swap.com). Engine really woke the old girl up. Trying to do final tuning on my own. Using LS Droid, and TunerPro RT. PCM out of 05 Silverado for the Analog A/C signal SVC# 12589462. OS# 12592618, and BIN 12585950. TunerPro needs ADX or XFD file to load BIN (I think). Still trying to sort it all out.

As I understand it, the Operating System is the firmware with the vehicle specifics, the BIN is the binary code of the actual operating parameters, and the Service # is the hardware of the PCM. I think tha ADX files interpret the BIN files so we can work on (modify) them. Please correct me if I am misinformed.

I have the BIN, so all I need is the correct ADX or XFD file to make adjustments in TunerPro? HELP

I would really appreciate any help/advice/tricks, etc.
Jeff